GL1100 Frame Covers


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
User avatar
binder49
Posts: 85
Joined: Wed Apr 13, 2011 8:26 pm
Location: Mapleton ND
Motorcycle: 1980 GL1100 Goldwing

GL1100 Frame Covers

Postby binder49 » Sun Nov 27, 2011 5:34 pm



Does anyone know where I can find the mounting hardware for Drag Specialties frame covers. I have the chrome covers but no hardware. Thanks



User avatar
binder49
Posts: 85
Joined: Wed Apr 13, 2011 8:26 pm
Location: Mapleton ND
Motorcycle: 1980 GL1100 Goldwing

Re: GL1100 Frame Covers

Postby binder49 » Sat Dec 03, 2011 4:12 pm

Anyone.... Anyone???

User avatar
MJSantos
Posts: 317
Joined: Wed Dec 16, 2009 9:19 pm
Location: York, Pa
Motorcycle: 1983 GL1100I
1983 GL1100 Custom
2002 Shadow
1983 Honda Magna V45
Contact:

Re: GL1100 Frame Covers

Postby MJSantos » Mon Dec 05, 2011 8:20 pm

Are you talking about these covers?

if so the top is held in place by one bolt that used on the upper engine mount. The back is behind the peg on the left side then on the right back, is a small piece of flat stock with a 3/8 bolt that aligns the cover behind the peg. Up front on the side is an attachment tab the holds it against the engine On the right it uses a 1" conduit clamp affair with 3/8 bolt that holds it against the frame.

User avatar
binder49
Posts: 85
Joined: Wed Apr 13, 2011 8:26 pm
Location: Mapleton ND
Motorcycle: 1980 GL1100 Goldwing

Re: GL1100 Frame Covers

Postby binder49 » Tue Dec 13, 2011 7:50 pm

MJSantos, thanks for the info. The 1 inch conduit clamp worked perfect




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Yahoo Slurp [Bot] and 4 guests