Oil Control Orifice on Cylinder Head


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Warrensocal
Posts: 17
Joined: Mon May 25, 2009 4:56 am
Location: United States
Motorcycle: 1984 GL1200 Aspencade, 1978 GL1000

Oil Control Orifice on Cylinder Head

Postby Warrensocal » Sat Apr 28, 2012 6:04 pm



No new o-rings for the oil control orifice came with the head gasket I ordered. Can anyone tell me the best place to get them?

Thanks...

Warren



User avatar
tricky
Posts: 341
Joined: Fri Jun 26, 2009 4:14 pm
Location: Canada

Re: Oil Control Orifice on Cylinder Head

Postby tricky » Sun Apr 29, 2012 7:46 am

I always order mine from my local dealer

Warrensocal
Posts: 17
Joined: Mon May 25, 2009 4:56 am
Location: United States
Motorcycle: 1984 GL1200 Aspencade, 1978 GL1000

Re: Oil Control Orifice on Cylinder Head

Postby Warrensocal » Sun Apr 29, 2012 8:48 am

I called my local dealer and was told they no longer make them.

User avatar
Mooseman
Posts: 383
Joined: Thu Sep 10, 2009 11:10 am
Location: Napa, CA
Motorcycle: 1996 GL1500SE 86k
1986 GL1200A (SOLD) 81K
1985 GL1200A (SOLD) 85K
1986 BMW K75c 24K

Re: Oil Control Orifice on Cylinder Head

Postby Mooseman » Sun Apr 29, 2012 12:05 pm

Type what you are looking for in your search browser.
Here are a few I came up with. As you can see they are used on many diffrent years of bikes and other equipment.
I'm sure someone has them around.
O-Ring 4.1X1.5
http://www.ereplacementparts.com/oring- ... 46705.html

http://www.ronayers.com/WhereUsed/N/993 ... 08-371-003

O-Ring 6.5X1.5
http://www.boats.net/parts/detail/honda ... 6-003.html

http://www.ereplacementparts.com/oring- ... 46704.html

Also listed for the Honda cars, same part number. You could also search by part #
Enjoy the ride. They are all good, just some better than others.
Mooseman

User avatar
tricky
Posts: 341
Joined: Fri Jun 26, 2009 4:14 pm
Location: Canada

Re: Oil Control Orifice on Cylinder Head

Postby tricky » Sun Apr 29, 2012 1:38 pm

Warrensocal wrote:I called my local dealer and was told they no longer make them.


Obviously your dealer is too lazy to bother looking up the part and ordering it.

Sure lots of stuff is no longer available but O rings...

Warrensocal
Posts: 17
Joined: Mon May 25, 2009 4:56 am
Location: United States
Motorcycle: 1984 GL1200 Aspencade, 1978 GL1000

Re: Oil Control Orifice on Cylinder Head

Postby Warrensocal » Sun Apr 29, 2012 11:08 pm

Thanks! I'll order these first thing in the morning...




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest