Air Pump Fitting-HELP?


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
User avatar
GWLDL
Posts: 23
Joined: Fri Apr 02, 2010 4:37 pm
Location: Minneapolis, MN
Motorcycle: 1984 GL1200 Aspencade
1983 VT500c Shadow
1980 CanAm QualifierIII

Air Pump Fitting-HELP?

Postby GWLDL » Sun Apr 29, 2012 9:12 am



I was taking off the fairing-to replace the front brake lines.
The PO left me another surprise..he shanked the fitting at the bottom of the air pump/compressor-that the rear shocks air line attaches to. So when I went to take that hose off-to remove the fairing...lucky me. Now I know where the system was leaking.
Has anyone ever replaced these fittings? Is there anywhere that might carry something like this? I don't see it listed as a part in the Pump/Drier section. Any help would be great..seems like one surprise after another



User avatar
Mooseman
Posts: 383
Joined: Thu Sep 10, 2009 11:10 am
Location: Napa, CA
Motorcycle: 1996 GL1500SE 88k
1986 GL1200A (SOLD) 81K
1985 GL1200A (SOLD) 85K
1986 BMW K75c 25K

Re: Air Pump Fitting-HELP?

Postby Mooseman » Sun Apr 29, 2012 12:14 pm

Out of my realm here. But I'm thinking a place that does AC hose and or brake hoses/air lines maybe able to make one up?
My parts diagram shows several hoses. Don't know if it's the one you are looking for or not. Sure someone will jump in that knows about these things.
http://www.leeshonda.com/fiche_section_detail.asp
Enjoy the ride. They are all good, just some better than others.
Mooseman

User avatar
Mooseman
Posts: 383
Joined: Thu Sep 10, 2009 11:10 am
Location: Napa, CA
Motorcycle: 1996 GL1500SE 88k
1986 GL1200A (SOLD) 81K
1985 GL1200A (SOLD) 85K
1986 BMW K75c 25K

Re: Air Pump Fitting-HELP?

Postby Mooseman » Sun Apr 29, 2012 6:33 pm

Here are some fittings on e-bay. Don't know if the one you need is here or not.
http://www.ebay.com/itm/Honda-GoldWing- ... fc&vxp=mtr
Enjoy the ride. They are all good, just some better than others.
Mooseman

User avatar
GWLDL
Posts: 23
Joined: Fri Apr 02, 2010 4:37 pm
Location: Minneapolis, MN
Motorcycle: 1984 GL1200 Aspencade
1983 VT500c Shadow
1980 CanAm QualifierIII

Re: Air Pump Fitting-HELP?

Postby GWLDL » Thu Jun 28, 2012 3:20 pm

It was part number 26. The lower end of that "connector" had the threads stripped so badly that when i unscrewed it-when I was removing the fairing-the end of the threads just broke off.
Here is what it was
My Local Honda shop found a Honda shop in Ohio-College Cycle which had the Honda OEM part.




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: MSNbot Media [Bot] and 7 guests