1985 1200 a

Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Posts: 48
Joined: Sun May 22, 2011 9:10 pm
Location: Huntsville tx
Motorcycle: 1985 gl1200

1985 1200 a

Postby Bbwelder » Thu Jun 07, 2012 7:09 am

How big a job is replacing the ignition switch on my 1200 ?

User avatar
Posts: 840
Joined: Sat Aug 14, 2010 9:14 pm
Location: New Albany In
Motorcycle: 1984 gl1200a&1985GL1200A & 1996 gl 1500 aspy. us army 74-77

Re: 1985 1200 a

Postby HALBUDD » Thu Jun 07, 2012 4:26 pm

well first you will need to take the cover over your key switch off,then the way I did it was get a long extension and using a swivel head get down under the front and you will see the two nuts holding the switch in.Take the two nuts off forgot to say it will help if you take the false tank off too as it will help to get to the harness were the switch is plugged in.It will take a little wiggling to get the switch passed the air tubes for the front forks.Some have done it from the top with a wrench but my hands are to big to do it that way. Hope this helps,and good lock. Hal
A woman that can use tools is worth her weight in gold !!

Return to “GL1200 Information & Questions”

Who is online

Users browsing this forum: No registered users and 5 guests