Faring question

Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Posts: 147
Joined: Thu Nov 03, 2011 9:19 pm
Location: Des Moines, Iowa
Motorcycle: 1984 GL1200 Interstate

Faring question

Postby harkgold » Fri Jun 15, 2012 5:09 pm

On my '84 GL1200 Interstate I have a question regarding the lower faring trim pieces that also surround the radiator.
On both the left and right lower faring piece there is a piece of black soft rubber trim that fits vertically along each side of the radiator with a matching body trim that fits horizontally across the bottom of the radiator that ties the two pieces of lower trim together.
My question is this......is this piece of soft rubber that fits along both sides of the radiator supposed to tuck back and fit along the outside of the radiator on each side, or is this rubber piece supposed to lay flat and overlap on top of left and right edges of the radiator where it can be visible?
I can't seem to see any photos in any manuals that show this very closely.

User avatar
Posts: 7581
Joined: Sun Sep 19, 2010 5:39 pm
Location: Denham Springs,La.
Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I

Re: Faring question

Postby virgilmobile » Sat Jun 16, 2012 3:18 pm

As I recall,it lays flat.It is a seal to force all captured air to the radiator.

Return to “GL1200 Information & Questions”

Who is online

Users browsing this forum: Yahoo Slurp [Bot] and 1 guest