Rear wheel


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
dvjoiner
Posts: 4
Joined: Fri May 28, 2010 4:15 am
Location: ruffs dale pa
Motorcycle: 1987 gl1200a aspencade

Rear wheel

Postby dvjoiner » Wed Jul 04, 2012 9:05 am



What rear wheel Will fit a 1987 aspencade was going to change bearings but housing is worn out :cry:
Attachments



User avatar
Right Winger
Posts: 278
Joined: Sun Nov 15, 2009 6:46 pm
Location: Pittsburgh
Motorcycle: 85 ltd
84aspy

Re: Rear wheel

Postby Right Winger » Wed Jul 11, 2012 12:45 am

Well you have the best wheel being from an 87 . What I would do is take it to a good machine shop and have a sleeve machined in there and put a new bearing in it :?:

lewfoer
Posts: 9
Joined: Sun Mar 21, 2010 12:39 pm
Location: Chehalis Washington
Motorcycle: 1984 GL1200 Interstate
2002 GL 1800

Re: Rear wheel

Postby lewfoer » Tue Jul 17, 2012 4:39 am

Any good machine shop can fix this. I just had it done to my 84.

dvjoiner
Posts: 4
Joined: Fri May 28, 2010 4:15 am
Location: ruffs dale pa
Motorcycle: 1987 gl1200a aspencade

Re: Rear wheel

Postby dvjoiner » Tue Jul 17, 2012 5:51 pm

I'm a machinist but need to get bike back on the road found one and bike on the road I am going to machine and bush the old one after riding season

Ghostrider52005
Posts: 124
Joined: Sun Dec 20, 2009 7:19 pm
Location: Olive Hill Kentucky
Motorcycle: 1985 GL 1200 LTD, 1984 GL1200 Interstate, VS 700 Suzuki Intruder.

Re: Rear wheel

Postby Ghostrider52005 » Wed Jul 18, 2012 5:59 pm

Yeah gottta have mine machined too. Running it loose right now. Doesnt hurt anything just the click. Have a spare with same problem that will pin and put sleeve retainer in when I change tires then have this wheel machined while run that one :lol:

lewfoer
Posts: 9
Joined: Sun Mar 21, 2010 12:39 pm
Location: Chehalis Washington
Motorcycle: 1984 GL1200 Interstate
2002 GL 1800

Re: Rear wheel

Postby lewfoer » Wed Jul 18, 2012 6:02 pm

Running like that will take out your final drive.




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 4 guests