Electrical square 4 pin conn


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Honker91
Posts: 32
Joined: Tue Jul 10, 2012 6:03 pm
Location: continental ohio
Motorcycle: 1985 aspencade gl 1200

Electrical square 4 pin conn

Postby Honker91 » Sun Jul 15, 2012 9:32 am



I have a 85 aspencade. Im trying to find out if this conn is for turn signal relay, cause i dont have any right now. Color of wires as followed, black w/blue stripe. White w/ green stripe. Light blue w/ white stripe. Orange w/green white stripe. And i have tried to find a square 4 pin turn signal relay with no luck.
Attachments



User avatar
WingAdmin
Site Admin
Posts: 17045
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Electrical square 4 pin conn

Postby WingAdmin » Mon Jul 16, 2012 1:02 pm

Honker91 wrote:I have a 85 aspencade. Im trying to find out if this conn is for turn signal relay, cause i dont have any right now. Color of wires as followed, black w/blue stripe. White w/ green stripe. Light blue w/ white stripe. Orange w/green white stripe. And i have tried to find a square 4 pin turn signal relay with no luck.


I'm not sure what it is, but it's definitely related to the turn signals. I don't think it's for the turn signal relay however.

Orange/white has +12V to power the left front running light, and turns off when the turn signal is turned to left (so the flash filament can be flashed).
Light blue/white has +12V to power the right front running light, and turns off when the turn signal is turned to right (so the flash filament can be flashed).
White/green is +12V when ignition is on.
Black/blue - the only place I could find this was on the wire going to the fan motor.

I've been unable to find a 4P connector in the schematic with all four of these wires.

Honker91
Posts: 32
Joined: Tue Jul 10, 2012 6:03 pm
Location: continental ohio
Motorcycle: 1985 aspencade gl 1200

Re: Electrical square 4 pin conn

Postby Honker91 » Tue Jul 17, 2012 5:59 am

I was able to find a older mechanic at a shop. He knew about this plug and harness. It for the turn signal relay, and only a few bikes had this. And he was able to get me a new relay for it. Thanks for your help though.


Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: geraldm and 2 guests