Stator wiring Harness- parts ?

Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
User avatar
Posts: 358
Joined: Sun Aug 09, 2009 9:39 am
Location: Langley, BC
Motorcycle: 1985 GL1200 GoldWing Aspy

Stator wiring Harness- parts ?

Postby SilverDave » Mon Nov 05, 2012 2:57 pm

Electrical connections has had available for years a wiring harness for the GL1200: at $49 ... plus $20 shipping ... charge.htm

As I recall mine it had the usual stator wires, most wires for the rect reg, a relay to turn off the coils , 2 healthy fuses, strong crimped connectors, and separate wires to the coils ... but I just installed it, I did not create a circuit diagram for it.

An electrical friend wants to " Make his own" the $20 shipping gets him, I guess.

Has anyone ever created a diagram, and a shopping list to fabricate your own wiring harness for the GL1200 ??


User avatar
Posts: 7581
Joined: Sun Sep 19, 2010 5:39 pm
Location: Denham Springs,La.
Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I

Re: Stator wiring Harness- parts ?

Postby virgilmobile » Mon Nov 05, 2012 3:50 pm

The only thing on my shopping list was a relay and 2 fuse holders.One 5 amp and a heavy duty 30 amp

I had the heat shrink tubing,solder and solder gun.
I used the existing wiring as it is suitable.
The problems occurs in corroded crimp connections and corroded plug connections.
I idle at 900 rpm and show 14.1 volts on the battery.It maxes out at 14.4 volts.
Full load...brake lights and high beam at a idle will drop the voltage to 13.8.
Here's my doings.viewtopic.php?f=5&t=12522

Return to “GL1200 Information & Questions”

Who is online

Users browsing this forum: wilmo and 5 guests