Over the past winter, I replaced the front and rear brakes pads.
Recently, at very low speeds my rear brake has a slight squeak.
I measured the front and rear calipers and they were well withing the tolerances.
Is this as simple as hitting both sides of the calipers with some emery cloth or is there something else I should try?
Thanks for the input.
Information and questions on GL1200 Goldwings (1984-1987)
- Sponsored Links
2 posts • Page 1 of 1
- Site Admin
- Posts: 17045
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
It depends on what is squeaking! Try the emery cloth first and see if that does it. If not, then start hunting it down. You'll have the left bag off anyway to get to the pads, so you can get a better idea of where it's coming from.
Who is online
Users browsing this forum: No registered users and 2 guests