1986 GL1200 Aspincade


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
baltes
Posts: 2
Joined: Thu Apr 15, 2010 8:22 am
Location: Aurora, Illinois
Motorcycle: 1987 GL1200 Aspencade

1986 GL1200 Aspincade

Postby baltes » Thu Apr 15, 2010 8:30 am



Hello All! Just wondering if anyone else has had the problems I have with the radio needing to be reset after sitting overnight, and the trip odometer resting to some strange number. Any help PLEASE!



JohnnyRocket
Posts: 6
Joined: Fri Apr 02, 2010 9:35 am
Location: New Bloomfield, MO
Motorcycle: 1986 GL1200A

Re: 1986 GL1200 Aspincade

Postby JohnnyRocket » Thu Apr 15, 2010 9:18 am

I have the same problem with my 86 hope we can get some answers.

baltes
Posts: 2
Joined: Thu Apr 15, 2010 8:22 am
Location: Aurora, Illinois
Motorcycle: 1987 GL1200 Aspencade

Re: 1986 GL1200 Aspincade

Postby baltes » Fri Apr 16, 2010 2:54 pm

WOW! Must have stumped everyone with this one.
Lee

User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 1986 GL1200 Aspincade

Postby WingAdmin » Fri Apr 16, 2010 3:04 pm

Just a wild guess, but I'd look at the fuse that supplies power to both of those things when the bike is turned off.

User avatar
thrasherg
Posts: 1838
Joined: Tue Oct 20, 2009 11:21 am
Location: Plano, TX
Motorcycle: 2004 GL1800, 2005 Honda Shadow 750, 2008 Yamaha R6 with RG500 engine, CRF450X, CRF230, CRF250X, XR200, CR500

Re: 1986 GL1200 Aspincade

Postby thrasherg » Fri Apr 16, 2010 3:25 pm

Like wingman, I would suspect the permenant VDD feed. There are two positive supplies to the radio, one goes on and off with the ignition switch, the other is a permenant supply that keeps the memories and other circuitry in the stereo powered up. The symptoms you describe looks like the permenant supply is not there, so likely a failed fuse or bad connection somewhere.

Gary




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 3 guests