Gearshift indicator connector - Help


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
User avatar
Damgaard
Posts: 35
Joined: Tue May 21, 2013 11:15 am
Location: Denmark, Tonder 4 km from the Danish/German border
Motorcycle: GL 1200 Aspencade 1985

Gearshift indicator connector - Help

Postby Damgaard » Thu May 15, 2014 9:52 am



During assembling my Aspencade 1986 i have a problem. I can't find where to connect the Black 6 pin connector from the gearshift indicator wiring on the engine to the wiring harnes on the bike. It seems like the connector in the wiring harnes on the bike is dissapeared...

Can anybody tell me where i can find the 6 pin connector in the wiring harnes on the bike... Where to look... :roll:



User avatar
virgilmobile
Posts: 7663
Joined: Sun Sep 19, 2010 5:39 pm
Location: Denham Springs,La.
Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I

Re: Gearshift indicator connector - Help

Postby virgilmobile » Thu May 15, 2014 1:29 pm

This information might help.........The view appears to be from the top left side looking toward the front right side under the shelter...

User avatar
Damgaard
Posts: 35
Joined: Tue May 21, 2013 11:15 am
Location: Denmark, Tonder 4 km from the Danish/German border
Motorcycle: GL 1200 Aspencade 1985

Re: Gearshift indicator connector - Help

Postby Damgaard » Fri May 16, 2014 2:29 am

Thank you. I have looked in the ignition box area - but no luck. I Wonder were that female 6 pin connector is gone... I remember while lifting the engine out of the frame, the engine hang in the gearshift cable, but i can't remember where i unplugged it... It's nearby 2 years ago... It's driving me crazy...

I have taken out ignition box and the ignition coils, to look if the Black 6 pin female connector was hidden anywere... nope...

Does anybody know where the female 6 pin comes out of the bikes wiring harnes ???
Attachments
6 pin male connector from engine
6 pin male connector from engine

User avatar
Damgaard
Posts: 35
Joined: Tue May 21, 2013 11:15 am
Location: Denmark, Tonder 4 km from the Danish/German border
Motorcycle: GL 1200 Aspencade 1985

Re: Gearshift indicator connector - Help

Postby Damgaard » Sat May 17, 2014 11:41 pm

Well after long time search i located the "missing" connector hidden under the left side wiring harness... The connector wire comes out of the thick harness underside and is only 5 cm/2 inch long...
Attachments




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests