GL1200 Turn Signals won’t work

[nevada4419]

I have a 1984 Interstate that I recently did a Poor Boy Conversion on and now my turn signals won’t work. They worked fine before I did the work so It must be something I did. The left horn has to be removed but I don’t see what that would have to do with turn signals. I did not reinstall the horn, just tied the wires up. Also there was a light bar on the bottom of the radiator that I did not reinstall, I cut the wires and tied them up. Again don’t see why that would effect the turn signals. Thanks in advance for any help.

[washandy98664]

I had the problem of no turn signals, I just ran a ground from the relay under the seat.
May want to look at that.
I know you did the conversion but these older bikes are notorious for bad grounds.

[nevada4419]

Thanks for the info, I'll check that ground wire.