One of my first posts was about crap wiring, it was also the reason I decided to clean and take a closer look at the bike I just bought because if the PO did crap wiring I wanted to find all of it.
I am just about ready to put the trunk back on so while looking at the light bar I had fixed wiring on (got rid of the scotch locks,(wire taps), hate those cheesy things) I put bulbs in to test again and noticed that the bayonet bulbs they use for the blinker have cheap sockets so, I changed them to L.E.D. I used four on each side for the blinker.
this is what I started with
I cut the socket off
then I took a piece of sheet and broke it to the shape I wanted, drilled holes in it and silver brazed it to the remaining part of the light base
Got it wired up and it works pretty good now, man I hate cheap made crap....
Information and questions on GL1200 Goldwings (1984-1987)
- Sponsored Links
2 posts • Page 1 of 1
- Site Admin
- Posts: 17046
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
Hey, nice, I like that it shows up like a little arrowhead.
Who is online
Users browsing this forum: No registered users and 2 guests