Single Pic 34 carb settings for Scrappy needed.


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
nlovern
Posts: 46
Joined: Fri May 23, 2014 6:55 pm
Location: Rural Retreat,Va
Motorcycle: 1986 GL1200I

Single Pic 34 carb settings for Scrappy needed.

Postby nlovern » Sun Jun 07, 2015 4:27 pm



Hi everyone.
Nathan Lovern here. I got Scrappy started up. made a PVC intake and using a Solex Pic 34 carb, rebuilt it and I was wanting to know how many turns out the big screw and the little one under it should be turned out for a low idle. It idles high now. Revs good.
Im guessing they both have to be adjusted to get idle down. Hope some one here can help.
Thanks
Nathan Lovern,Va



User avatar
skier
Posts: 154
Joined: Sun Jul 17, 2011 11:57 am
Location: Coon Rapids MN
Motorcycle: 1987 GL1200I 124k
2009 Honda Silverwing 14k -- the wife's scooter

Re: Single Pic 34 carb settings for Scrappy needed.

Postby skier » Tue Jun 09, 2015 6:01 pm

I've never worked on one, but this might help: http://www.angelfire.com/tx2/ntnb/Carb_Instructions.htm

Let us know how it works out.

User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: Single Pic 34 carb settings for Scrappy needed.

Postby auctioneeral » Tue Jun 09, 2015 7:42 pm

small screw i got set around 1 3/4 turns out. the big screw adjust your idle. let me know how you make out. I'm working on setting up a empi 34


Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 3 guests