Ecu location on 1986 Honda goldwing SEi


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Jun 09, 2015 4:45 pm



I'm t trying to sort this bike out and everyone is talking about lights on the ecu Where is the Ecu. Is that the box with a ton of wire going into it under the trunk. Is so hire do you get to it to see these lights



User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: Ecu location on 1986 Honda goldwing SEi

Postby trike lady » Tue Jun 09, 2015 5:00 pm

Yes, that's it. The lights are on the left side (if seated on the bike) on the box hidden under the trunk.
This is the chart for the lights.

Image
I.M.B.B.A. Technician II Certified

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Jun 09, 2015 5:20 pm

Thank you. I feel like an idiot now. I was looking at the top back and side with wires thinking they wouldn't really make you remove it from the plastic cover to read codes would they? lol

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Jul 21, 2015 5:16 pm

Ok finally getting back to this bike. I or prelude fuel pump on and it starts very hard fuel system light on ecu is blinking 0,1,3 says Gl sensor open circuit. What is Gl sensor

User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: Ecu location on 1986 Honda goldwing SEi

Postby trike lady » Tue Jul 21, 2015 6:14 pm

There are a pair of sensors located behind a cover on the back of the right cylinder head. This is the can shaft angle sensor. The sensors are labeled GL and GR, one for the left side and the other for the right.
Attachments
I.M.B.B.A. Technician II Certified

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Jul 21, 2015 7:27 pm

Thank you. I don't think they are available :cry:

User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: Ecu location on 1986 Honda goldwing SEi

Postby trike lady » Tue Jul 21, 2015 9:04 pm

I.M.B.B.A. Technician II Certified

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Jul 21, 2015 9:26 pm

You are awesome. Found one 165.00

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Aug 04, 2015 4:53 pm

trike lady wrote:You may want to contact Western Honda for part# 36142-MG9-951 they may have a lead for one. http://www.westernhonda.com/
http://www.stevescyclesalvage.com or https://www.davidsilverspares.com/GL1200-GOLD-WING/ or http://www.hondarestoration.com/index.htm


Do you have a pic and/or a diagram showing the location and mounting of the fuel pump. PO put wrong fuel pump in saddle bag and I can't figure out how the correct one I bought is supposed to mount

User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: Ecu location on 1986 Honda goldwing SEi

Postby trike lady » Tue Aug 04, 2015 7:32 pm

For some reason I am having a problem with uploading pics, the fuel pump should be located in the location on the side of the engine above the brake pedal under a chrome cover.
I.M.B.B.A. Technician II Certified

cfoth
Posts: 23
Joined: Wed May 27, 2015 5:41 am
Location: andover ny
Motorcycle: 1986 GL1200 Aspencade SEI

Re: Ecu location on 1986 Honda goldwing SEi

Postby cfoth » Tue Aug 04, 2015 9:09 pm

trike lady wrote:For some reason I am having a problem with uploading pics, the fuel pump should be located in the location on the side of the engine above the brake pedal under a chrome cover.

Can you text the pics? 585 808 1620
Does the banjo fitting got to the front of the bike and a house with house clamp to the back of the pump to the shutoff valve?

User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: Ecu location on 1986 Honda goldwing SEi

Postby trike lady » Tue Aug 04, 2015 9:32 pm

The phone I have doesn't have the ability to send pics and the page from the service manual for the fuel pump.
PM me your email and I can send them in an email.
I.M.B.B.A. Technician II Certified

User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Ecu location on 1986 Honda goldwing SEi

Postby WingAdmin » Wed Aug 12, 2015 4:46 pm

trike lady wrote:For some reason I am having a problem with uploading pics, the fuel pump should be located in the location on the side of the engine above the brake pedal under a chrome cover.


Try it now, the problem is fixed.




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest