Wiring diagram for GL1200 HID conversion


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
User avatar
SilverDave
Posts: 367
Joined: Sun Aug 09, 2009 9:39 am
Location: Langley, BC
Motorcycle: 1985 GL1200 GoldWing Aspy

Wiring diagram for GL1200 HID conversion

Postby SilverDave » Tue Jul 07, 2015 1:19 pm



Has anyone seen a wiring diagram for installing a HID H4 conversion in a GL1200 ?

( including having the blue dash High beam light working )

SilverDave



User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring diagram for GL1200 HID conversion

Postby WingAdmin » Tue Jul 07, 2015 1:27 pm

Most of the HID conversions plug into your existing H4 bulb connector, so the wiring (if any) is minimal. Some run just off the H4 connector, some run off the H4 connector plus an additional (fused) line to the battery and to ground.

I put this one in my wife's PC800, and it was plug-and-play, no wiring involved:

http://cyclemax.com/inc/sdetail/gl1000_ ... 105/218610


User avatar
SilverDave
Posts: 367
Joined: Sun Aug 09, 2009 9:39 am
Location: Langley, BC
Motorcycle: 1985 GL1200 GoldWing Aspy

Re: Wiring diagram for GL1200 HID conversion

Postby SilverDave » Tue Jul 07, 2015 6:59 pm

Sadly, mine did not come with " Plug-n-pkay connectors.... so I will have to cut and solder( and shrink wrap )


I am assuming that Green wire is ground, Blue is low beam, and white is high ??

SilverDave

User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring diagram for GL1200 HID conversion

Postby WingAdmin » Wed Jul 08, 2015 9:02 pm

SilverDave wrote:Sadly, mine did not come with " Plug-n-pkay connectors.... so I will have to cut and solder( and shrink wrap )


I am assuming that Green wire is ground, Blue is low beam, and white is high ??

SilverDave


Green is ground, but it's the other way around - White is high, blue is low.

User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring diagram for GL1200 HID conversion

Postby WingAdmin » Mon Jul 13, 2015 8:02 am

WingAdmin wrote:
SilverDave wrote:Sadly, mine did not come with " Plug-n-pkay connectors.... so I will have to cut and solder( and shrink wrap )


I am assuming that Green wire is ground, Blue is low beam, and white is high ??

SilverDave


Green is ground, but it's the other way around - White is high, blue is low.


Augh I wrote this wrong! Thanks for the PM calling me out - I knew when I read what you wrote that it was backwards, but then *I* wrote it backwards as well!!

It should be: white is LOW, blue is HIGH.

Headlight switch
Headlight switch




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests