1984 gl1200 stator replacement

Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Posts: 31
Joined: Sun Jun 03, 2012 11:22 pm
Location: Pikeville, Tennessee
Motorcycle: 1984 gl1200 interstate

1984 gl1200 stator replacement

Postby bobberwing » Mon Oct 05, 2015 11:58 am

Ok, so I have my engine out of bike and am ready to order parts to replace stator. Is there anything else I need to check while I have engine out and back cover off? Also where is a reliable source to get stator and other parts needed?

User avatar
wing rider 2012
Posts: 203
Joined: Thu May 16, 2013 4:49 pm
Location: Southern Oregon
Motorcycle: 2012 GL1800 Level I Blue/Silver
1998 GL1500 Aspy
1985 Venture Royal 1300
1979 GL1000

Re: 1984 gl1200 stator replacement

Postby wing rider 2012 » Mon Oct 05, 2015 12:28 pm

Ricks Moto Electric is a good place to get good quality components.
Vietnam Veteran
9th ID, Jan 69 - Oct 70
Member: Military Order of the Purple Heart
Member: Vietnam Veterans of America
Member: GWTA. Chapter A, Grants Pass, Oregon

Old Fogey
Posts: 738
Joined: Fri Oct 30, 2009 2:09 am
Location: Glasgow Scotland
Motorcycle: 1976 GL1000
1979 GL1000

Re: 1984 gl1200 stator replacement

Postby Old Fogey » Sun Oct 11, 2015 12:00 pm

Randakk is selling an uprated stator:
http://randakks.com/collections/ignitio ... and-gl1200
Clean out the starter clutch (on the back of the alternator rotor). If any of the rollers appear to have flats on them, they need to be renewed.
Do this mod on your scavenge pump: http://www.wingovations.com/scavenge-pu ... 4579471109
Check the condition of your friction plates in the clutch.
Good time to overhaul the clutch slave cylinder too.
Maybe replace the starter chain. They can and do break occasionally.
Image Image

'Impossible' is just a level of difficulty! The only stupid question is the one you didn't ask first!

Return to “GL1200 Information & Questions”

Who is online

Users browsing this forum: wctan and 1 guest