Hello to all,
1984 GL1200 Interstate
We were getting better weather up here in Michigan, should be riding in a couple weeks.
I would like to install a “Back-Off” module for my brake lights. The Module has a red wire in and a red/white wire out. The directions say to splice into the brake wire, trouble is which wire. I have the wiring diagram, but I’m a Mechanical guy not an Electrical guy.
Any help is appreciated!
Information and questions on GL1200 Goldwings (1984-1987)
- Sponsored Links
3 posts • Page 1 of 1
- Posts: 582
- Joined: Tue Sep 29, 2015 11:25 am
- Location: Grants Pass, Oregon
- Motorcycle: 1985 GL1200 Aspencade, 2003 K1200GT BMW, 1969 R69S BMW,92 R100 RT BMW
Sold : 84 V65 Magna, 82 Moto Guzzi, XS 1100 Yamaha,84 Wing Int., 80 650 Special, Only new bike 82 XV750 Virago (Guam),Honda 250,84 R100RT BMW,87 K100 LT BMW,93 K1100 LT BMW, 91 535 Virago, Honda 50
I would use a test light ( a dollar 2 ninety-eight) from Napa. Test on your battery to make sure the bulb is working. Clip the clamp end to a good ground. The probe end with lite put on a wire on switch or rear light wire. Step on the brake pedal if light lights thats the wire, if it doesn't go to the next wire. Battery Neg.- is always a good ground point.
Who is online
Users browsing this forum: kathybrj and 1 guest