my bike is not starting by the push button


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
goldwingrider78
Posts: 6
Joined: Sat Mar 05, 2016 1:07 pm
Location: puryear tn
Motorcycle: 1986 GL 1200 Aspencade

my bike is not starting by the push button

Postby goldwingrider78 » Wed Mar 16, 2016 10:48 pm



My bike was starting before with no problem but now it just clicks and the clicks are coming from up front of the engine and i tried to cross over the solenoid and it turns over but i dont get any spark



goldwingrider78
Posts: 6
Joined: Sat Mar 05, 2016 1:07 pm
Location: puryear tn
Motorcycle: 1986 GL 1200 Aspencade

Re: my bike is not starting by the push button

Postby goldwingrider78 » Wed Mar 16, 2016 10:52 pm

I just got done doing the alternater conversion in the presence of rain could rain cause your bike not to start

goldwingrider78
Posts: 6
Joined: Sat Mar 05, 2016 1:07 pm
Location: puryear tn
Motorcycle: 1986 GL 1200 Aspencade

Re: my bike is not starting by the push button

Postby goldwingrider78 » Wed Mar 16, 2016 10:55 pm

Oh and i didnt unhook any of the wiring

User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: my bike is not starting by the push button

Postby WingAdmin » Thu Mar 17, 2016 9:51 am

Start the simple diagnosis. Is the solenoid getting +12V at the coil lead when you press the starter button?

Is the headlight coming on when you switch ignition on? Does it go out when you press the starter?




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests