GL1200A,front brake master cylinder kit???


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
gervais
Posts: 152
Joined: Tue Oct 24, 2017 6:49 am
Location: riviere-bleue,quebec,canda
Motorcycle: GoldWing 1984 GL1200A Aspencade

GL1200A,front brake master cylinder kit???

Post by gervais » Mon Apr 09, 2018 7:12 pm



hi all
well i need a kit to rebuilt my front brake master cylinder,
i have found this number
45530-MA4-671 Honda OEM

Can i buy a jobber kit that is good and less $ than the OEM or should i stay with the OEM?

1984 Aspencade GL1200

finally it leave just the clutch master cylinder to rebuilt,,,,i have done all calipers,,,


thanks for the help,
if you have 1-or 2 links where they are bargain let me know

gervais



User avatar
oldishwinger
Posts: 301
Joined: Sun Jul 14, 2013 11:26 pm
Location: New Zealand
Motorcycle: 1986 GL1200 Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by oldishwinger » Tue Apr 10, 2018 4:58 pm

I have used the kits from saber cycle, they are not OEM but work fine, have had them in now for a few years, both clutch and front brake. not sure how they compare in price to OEM though.

DaveO430
Posts: 439
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: GL1200A,front brake master cylinder kit???

Post by DaveO430 » Tue Apr 10, 2018 6:23 pm

I have one I would sell, a new OEM kit I bought that wouldn't work because the cylinder had been bored out. I is a 45530-MG9-951, which translates to fit all 1200s and early 1500s. $25 in hand (paypal) and your address and it's on its way. PM me if you want it.

gervais
Posts: 152
Joined: Tue Oct 24, 2017 6:49 am
Location: riviere-bleue,quebec,canda
Motorcycle: GoldWing 1984 GL1200A Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by gervais » Tue Apr 10, 2018 7:01 pm

Dave
the parts number at honda that i found for the 1984 aspencade GL1200A was
45530-MA4-671

are you very sure of yours?

can you phone a dealer near you and ask?

i will check what oldiswinger is saying also for the jobber kit,i dont care if its jobber ,,if it goes on my Wing


i want to be sure it fits there,
i am in Canada also ,,not in the US

thanks ,i really appreciate the help

gervais

User avatar
oldishwinger
Posts: 301
Joined: Sun Jul 14, 2013 11:26 pm
Location: New Zealand
Motorcycle: 1986 GL1200 Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by oldishwinger » Tue Apr 10, 2018 7:48 pm

I think you may have the wrong OEM number for the kit, this is for a 84 aspy right? the OEM number that I got through cyclemax OEM is
45530-471-831 this coincides with non OEM kit at saber cycle here: https://www.saber-cycle.com/store/product112.html

check out my info before carrying on though I may be wrong.

DaveO430
Posts: 439
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: GL1200A,front brake master cylinder kit???

Post by DaveO430 » Tue Apr 10, 2018 7:59 pm

gervais wrote:
Tue Apr 10, 2018 7:01 pm
Dave
the parts number at honda that i found for the 1984 aspencade GL1200A was
45530-MA4-671

are you very sure of yours?

can you phone a dealer near you and ask?

i will check what oldiswinger is saying also for the jobber kit,i dont care if its jobber ,,if it goes on my Wing


i want to be sure it fits there,
i am in Canada also ,,not in the US

thanks ,i really appreciate the help

gervais
You're right, this is for 85 on. There is no need to phone a dealer, just look it up online.

DaveO430
Posts: 439
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: GL1200A,front brake master cylinder kit???

Post by DaveO430 » Tue Apr 10, 2018 8:01 pm

oldishwinger wrote:
Tue Apr 10, 2018 7:48 pm
I think you may have the wrong OEM number for the kit, this is for a 84 aspy right? the OEM number that I got through cyclemax OEM is
45530-471-831 this coincides with non OEM kit at saber cycle here: https://www.saber-cycle.com/store/product112.html

check out my info before carrying on though I may be wrong.
I wouldn't take sabre cycles word the sky is blue. But they are right on this one.

gervais
Posts: 152
Joined: Tue Oct 24, 2017 6:49 am
Location: riviere-bleue,quebec,canda
Motorcycle: GoldWing 1984 GL1200A Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by gervais » Wed Apr 11, 2018 7:21 am

well
man thats confusing all those parts numer!!!! :-)

And

what would be my parts number for 84 Aspencade???

gef

User avatar
oldishwinger
Posts: 301
Joined: Sun Jul 14, 2013 11:26 pm
Location: New Zealand
Motorcycle: 1986 GL1200 Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by oldishwinger » Wed Apr 11, 2018 4:36 pm

gervais wrote:
Wed Apr 11, 2018 7:21 am
well
man thats confusing all those parts numer!!!! :-)

And

what would be my parts number for 84 Aspencade???

gef
I would suggest you do some research on the numbers given they will probably all relate to kits for a 1200 goldwing, but unless the information states specifically that it fits a 84 apsy, then it would be wrong to assume it fits your bike. You are looking for a part number that says it is made to fit your bike, some information Ive seen is like "fits 84 to 87 Interstate and aspencade, but NOT sei ltd" this is specific infor that says it will fit a specific bike, and thats what you are looking for.

gervais
Posts: 152
Joined: Tue Oct 24, 2017 6:49 am
Location: riviere-bleue,quebec,canda
Motorcycle: GoldWing 1984 GL1200A Aspencade

Re: GL1200A,front brake master cylinder kit???

Post by gervais » Wed Apr 11, 2018 6:14 pm

well
you know waht,finally i called my Honda dealer and order an OEM ,,
and the kit for the master clutch in the same occasion so i will be clear for a while,,

gef



Post Reply