1986 GL1200A heel toe shifter bolt


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
dhenson45
Posts: 4
Joined: Sat Mar 31, 2018 3:27 pm
Location: Gig Harbor WA
Motorcycle: 1986 GL1200A

1986 GL1200A heel toe shifter bolt

Post by dhenson45 » Tue May 08, 2018 7:15 pm



Hi ,
New here so thank you in advance

New to me 86 GL1200 , Heel toe shifter bolt broke. found a new shoulder bolt identical to the old one . When I installed I realized there must have been a spacer? Or ? That was lost . I added washers to fill the 1/4 inch gap and now will not shift correct. Loosened bolt just a little so washers are not interfering / pinching against the housing bolt threads into . Taken apart and put back together many times and not sure what/ why it is not shifting. Removed heel toe and floorboard and it shifts great with toe shifter alone.

Any suggestions please



User avatar
WingAdmin
Site Admin
Posts: 18870
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 1986 GL1200A heel toe shifter bolt

Post by WingAdmin » Wed May 09, 2018 12:21 pm

dhenson45 wrote:
Tue May 08, 2018 7:15 pm
Hi ,
New here so thank you in advance

New to me 86 GL1200 , Heel toe shifter bolt broke. found a new shoulder bolt identical to the old one . When I installed I realized there must have been a spacer? Or ? That was lost . I added washers to fill the 1/4 inch gap and now will not shift correct. Loosened bolt just a little so washers are not interfering / pinching against the housing bolt threads into . Taken apart and put back together many times and not sure what/ why it is not shifting. Removed heel toe and floorboard and it shifts great with toe shifter alone.

Any suggestions please
It depends on who the heel/toe shifter manufacturer is (they are not factory/OEM). Could you perhaps post a picture?

dhenson45
Posts: 4
Joined: Sat Mar 31, 2018 3:27 pm
Location: Gig Harbor WA
Motorcycle: 1986 GL1200A

Re: 1986 GL1200A heel toe shifter bolt

Post by dhenson45 » Wed May 09, 2018 1:15 pm

little more research. I believe the boards and shifter were made by Markland .Haven't had a bike in 10 plus years, and never used a heel to shifter before but I like the floorboards. Heel toe shifter seems unnatural, but I guess I will get used to it. I am trying to add photos but keep getting an error message when I attach

User avatar
paneled
Posts: 55
Joined: Thu Sep 17, 2015 8:33 am
Location: kansas city mo
Motorcycle: 1986 Goldwing 1200 aspencade sei

Re: 1986 GL1200A heel toe shifter bolt

Post by paneled » Wed May 09, 2018 1:27 pm

I had similar issue with my heel toe set up,
found the washers were too thick and had
to file or sand one washer to make it thinner and
then it began shifting without binding. hope this helps.
86 aspy sei
54 chevy panel truck
68 chevy van
69 chevy van
64 chevy van

dhenson45
Posts: 4
Joined: Sat Mar 31, 2018 3:27 pm
Location: Gig Harbor WA
Motorcycle: 1986 GL1200A

Re: 1986 GL1200A heel toe shifter bolt

Post by dhenson45 » Wed May 09, 2018 2:03 pm

Thank you , I will try tonight. Also thought I would pick up a few nylon washers to try

dhenson45
Posts: 4
Joined: Sat Mar 31, 2018 3:27 pm
Location: Gig Harbor WA
Motorcycle: 1986 GL1200A

Re: 1986 GL1200A heel toe shifter bolt

Post by dhenson45 » Wed May 09, 2018 3:40 pm

I am able to add photos now of the Markland boards and heel toe shifter
Attachments











Post Reply