85 GL1200 Suspension Leveler Air Pump
-
- Sponsored Links
-
- Posts: 1
- Joined: Fri Apr 08, 2011 4:52 pm
- Location: Breaux Bridge, Louisiana
- Motorcycle: 1985 Limited Edition
GL 1200
85 GL1200 Suspension Leveler Air Pump
I can usually get 80-90 PSI out of my leveler air pump.The most I can get now is around 20-23 psi. I suspect my air pump assy has finally given it up after 26 years. Any other suggestions on where the problem may lie? Anyone know of a good source for an Air Pump Assy P/N 55836-001? Thanks!
- WingAdmin
- Site Admin
- Posts: 18739
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
Re: 85 GL1200 Suspension Leveler Air Pump
I don't know that you're going to find a new one, so your options are either to find a used one online, or adapt a new compressor that was meant for something else and work it in its place.
-
- Posts: 12
- Joined: Sun Apr 17, 2011 8:28 pm
- Location: Lakeland, FL
- Motorcycle: 1985 GL 1200L Aspencade
Re: 85 GL1200 Suspension Leveler Air Pump
check and clean your air dryer before you give up.
-
- Posts: 1
- Joined: Tue Jul 05, 2011 11:54 am
- Location: Rosiclare,IL.
- Motorcycle: 1985 GL1200L
Re: 85 GL1200 Suspension Leveler Air Pump
I have 85ltd.I have EEE on display and don't work.
Re: 85 GL1200 Suspension Leveler Air Pump
as stated, clean the filter, little foam thingy. then if that fails, Ebay, I have seen them cheap....under 50 bucks.