1986 gl1200 SE I cruise control replacement


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
lbrady
Posts: 6
Joined: Sat Jun 25, 2011 9:10 pm
Location: Galesburg
Motorcycle: 1986 1200 aspencade sei

1986 gl1200 SE I cruise control replacement

Postby lbrady » Sat Jun 25, 2011 9:36 pm



How deep do I have to go in tear down to get to the 2 electrical connections on the cruise control wire harness from the handle bar?I cannot seem to locate these 2 connections.thanks



User avatar
trike lady
Posts: 872
Joined: Thu Mar 24, 2011 5:58 pm
Location: Butler, PA
Motorcycle: 1993 GL1500 Aspencade with Voyager (Sold)
1983 GL650I SilverWing Interstate

Re: 1986 gl1200 SE I cruise control replacement

Postby trike lady » Sun Jun 26, 2011 12:23 am

Hello and welcome to the forum.
I speculate that you wish to get to the cruise control module and to do so you must remove the seat and top compartment. The unit is mounted on a frame behind the fuel filler cap.
I.M.B.B.A. Technician II Certified

lbrady
Posts: 6
Joined: Sat Jun 25, 2011 9:10 pm
Location: Galesburg
Motorcycle: 1986 1200 aspencade sei

Re: 1986 gl1200 SE I cruise control replacement

Postby lbrady » Sun Jun 26, 2011 8:43 am

I thought that also but the 2 electrical connections from the hand throttle must have another connection someplace because one has a 12 pin male end and the other has a 6 pin male end.their ultimate ending may be the module but i cannot find the link.Thanks for your help.It is greatly appreciated.Larry

lbrady
Posts: 6
Joined: Sat Jun 25, 2011 9:10 pm
Location: Galesburg
Motorcycle: 1986 1200 aspencade sei

Re: 1986 gl1200 SE I cruise control replacement

Postby lbrady » Sun Jun 26, 2011 9:00 pm

problem solved on the cruise control.I found the electrical link on the right hand side of the fairing.Thanks.Larry




Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: No registered users and 7 guests