motorcycle jack


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
inkman
Posts: 54
Joined: Thu Mar 18, 2010 7:14 pm
Location: elwood , il.
Motorcycle: 2008 goldwing

motorcycle jack

Postby inkman » Sun Aug 28, 2011 12:21 pm



have a 85 goldwing and a craftsman jack ,not sure where to put jack,exaust is below frame . can you put jack under exaust to raise bike.



saltydog
Posts: 33
Joined: Tue Jul 27, 2010 6:04 pm
Location: Pottsboro, TX
Motorcycle: 1986 GL1200 Aspencade

Re: motorcycle jack

Postby saltydog » Mon Aug 29, 2011 6:51 am

Over the years, I have picked up several bikes by using their exhaust with no problems. You could put together a filler block which would lift on the engine case. Since you would not have as wide a stance, the bike will tend to be tippier.(word?) Be sure and tie it down good.

inkman
Posts: 54
Joined: Thu Mar 18, 2010 7:14 pm
Location: elwood , il.
Motorcycle: 2008 goldwing

Re: motorcycle jack

Postby inkman » Wed Aug 31, 2011 5:15 pm

thanks for the input . just was not sure if exaust would hold up bike


Return to “GL1200 Information & Questions”




Who is online

Users browsing this forum: Bing [Bot] and 4 guests