Problem with installation Campbell harness

Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
Posts: 5
Joined: Fri Jun 11, 2010 5:42 pm
Location: chicago,Illinois
Motorcycle: 87 Interstate

Problem with installation Campbell harness

Post by louwortel » Sun Sep 04, 2011 11:16 am

I just installed the Dave Campbell harness on my 1987 Interstate. It turns over and all the electronics seem to be working but it won't start. Have any of you guy's installed this before? Have ant idea what the problem might be? I don't know a lot about electronics but I used a continuity tester to check my solder connections especially the wire going to the coils. I'd appreciate any help because tomorrow would be a great day to ride. Thanks Lou

Posts: 95
Joined: Sun Aug 29, 2010 8:08 pm
Location: vero beach, florida
Motorcycle: 1986 Aspencade

Re: Problem with installation Campbell harness

Post by 86GW1200 » Sun Sep 04, 2011 6:49 pm

I put it on my 86 aspy and seem to remember a similar problem. I'm too old to remember what it was exactly - but take a break and go back over the wires again - I know that is how I got mine working....if I remember the exact problem I'll post it. Wish I was more help.

Post Reply