Self cancel signal module location

Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
Posts: 1
Joined: Tue Mar 29, 2011 9:55 am
Location: Elk Wa
Motorcycle: 1993 gl1500

Self cancel signal module location

Post by corvairvan » Mon May 07, 2012 11:13 am

Hello, does anyone have an idea where the self cancel module may be on a 1993 GL1500A? Thank you.

User avatar
Site Admin
Posts: 18747
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Self cancel signal module location

Post by WingAdmin » Mon May 07, 2012 11:22 am

The control unit is actually inside the steering stem. It's not just the angle sensor. The bottom of the control unit is the angle sensor that connects to the bottom of the stem to measure the steering angle, but the rest of the control unit is mounted to the angle sensor, and is located inside the steering stem.

User avatar
Posts: 19
Joined: Sun May 06, 2012 10:54 am
Location: La Puente, CA
Motorcycle: 1993 GL1500A Aspencade

Re: Self cancel signal module location

Post by budavari » Tue May 08, 2012 9:39 pm

The turn signal canceling unit is accessed from the bottom of the steering stem, above the front fender. The wire connecting to it goes through the steering stem to the top. You will have to feed it some slack from above to be able to lower the unit and disconnect the connector and remove it. A new one is about $200 from Honda.

Post Reply