tranny output shaft remove/replace


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
billiards
Posts: 1
Joined: Sat Jun 30, 2012 3:14 pm
Location: rochester minnesota
Motorcycle: 1996 gl1500 se

tranny output shaft remove/replace

Post by billiards » Sat Jun 30, 2012 3:21 pm



I am considering removing the output shaft 1500 se 1996....the spline is worn .....how difficult is this project....i have an auth. gw shop manuel, very nicely give specs. and proceedure...has anyone done this? ..thanks a million



User avatar
Captain422
Posts: 47
Joined: Tue Aug 23, 2011 11:29 pm
Location: Paragould, Arkansas
Motorcycle: 1988 GL1500

Re: tranny output shaft remove/replace

Post by Captain422 » Sat Jun 30, 2012 7:34 pm

There are 2 great DIY articles that may help you with this procedure. The first one is written by "WingAdmin": How to remove and replace your rear wheel at this link viewtopic.php?f=14&t=11395 and a video by "heidebill" at this link http://www.goldwingdocs.com/forum/viewt ... =14&t=6951. These articles should give you the info you need. If not, just ask. There are a lot of great people on here that are happy to help.

Post Reply