Removing a cylinder head.


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
wingman1000
Posts: 13
Joined: Fri Sep 13, 2013 6:19 am
Location: Plymouth, Devon, England, United Kingdom
Motorcycle: 1998 GL1500SE
1979 GL1000KZ

Removing a cylinder head.

Postby wingman1000 » Sat Oct 12, 2013 6:44 am



Hi. Due to a silly mistake I have to replace some valves on my GL1500SE 1998. I am at present trying to remove the right cylinder head. I have undone all the bolts, released the exhaust system and inlet manifold. The head is sort of loose except there is a black, metal pipe which comes out of the back of the head. It is about 1inch in diameter and has another smaller pipe attached to it further into the guts of the bike. It seems this is stopping the head from coming off.

Any idea what this is and how to release it?

HELP!!!!

Best wishes
Chris



User avatar
RBGERSON
Posts: 2625
Joined: Tue Mar 09, 2010 7:57 am
Location: SCOTTSDALE, AZ
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: Removing a cylinder head.

Postby RBGERSON » Sat Oct 12, 2013 8:50 am

water pipe attached with o ring/gasket..wiggle and pull a little lube may help it break loose.
HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE

FAIR WINDS,
RB

wingman1000
Posts: 13
Joined: Fri Sep 13, 2013 6:19 am
Location: Plymouth, Devon, England, United Kingdom
Motorcycle: 1998 GL1500SE
1979 GL1000KZ

Re: Removing a cylinder head.

Postby wingman1000 » Sat Oct 12, 2013 9:39 am

Thanks, that worked.
Regards
Chris


Return to “GL1500 Information & Questions”




Who is online

Users browsing this forum: mburmandds and 5 guests