stripped 1991 1500 se

Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
Posts: 1
Joined: Sat May 01, 2010 5:48 pm
Location: lynchburg tn.
Motorcycle: 1991 goldwing gl1500 se

stripped 1991 1500 se

Post by robertsonhollowfarms » Sat May 01, 2010 6:20 pm

I have a 91 Goldwing that has been stripped to engine/frame, I think" I have all the parts." Does any one have a suggestion as how to start to reassemble, The electrical system and fiberglass parts ?

Posts: 1
Joined: Tue Apr 27, 2010 4:49 pm
Location: Hobart, New York
Motorcycle: 89 GL1500, 84,000 miles

Re: stripped 1991 1500 se

Post by 89Goldwing » Sun May 02, 2010 5:45 pm

I'm a new member, this is my first post. If it were me, I would get a Honda service manual for a 91 and lookup the proceadure to remove the engine, and reverse the proceadure to install it. Next, I would work on the electrical and vacuum hoses, suspension, ect... The fiberglass parts are not bad, and would go on last of course. I bought a service manual for my 89 on ebay. It has alot of pictures and can be helpful with what size bolt goes where. I wish you luck, It sounds like a major project if you were not the one that took it apart.


Post Reply