Right handlebar control plug


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
User avatar
nvirgilio
Posts: 2
Joined: Tue Sep 30, 2014 2:33 pm
Location: Mokena, IL
Motorcycle: 1992 GL1500A Aspencade

Right handlebar control plug

Post by nvirgilio » Sun Mar 15, 2015 5:48 pm



Searched these forums and web with no answers. I own a 1992 GL1500A. My wife accidentally grabbed the wire while getting off the bike and pulled the plug cover boot and the 4 female connectors off the right handle bar control at the lower front position. Instead of a 4 position female plug, it's a rubber boot with 4 individual female connectors, 2 large and 2 small. Any idea which wire goes where. The top smaller ones are to the brake lights and don't know if polarity counts. Not sure about the larger bottom 2. Bike starts, reverse works, kill switch works with the 2 larger ones disconnected as well as the "Cruise control on" light lights on dash also. Don't know what else the lower wires can be controlling.
Attachments







User avatar
ct1500
Posts: 918
Joined: Wed Nov 10, 2010 8:09 pm
Location: Glastonbury,CT
Motorcycle: 1988 GL1500
Contact:

Re: Right handlebar control plug

Post by ct1500 » Sun Mar 15, 2015 7:04 pm

Polarity does not matter. Those two wires are for the front brake cruise cancel feature.
This is what I do
Local and need repair help with your 1500, Valkyrie or ST please click contact.

User avatar
Dusty Boots
Posts: 689
Joined: Mon Oct 26, 2009 4:25 pm
Location: Alvinston, SW ON
Motorcycle: 1992 GL1500Aspencade

Re: Right handlebar control plug

Post by Dusty Boots » Sun Mar 15, 2015 7:05 pm

This should help you out!







Dusty

User avatar
nvirgilio
Posts: 2
Joined: Tue Sep 30, 2014 2:33 pm
Location: Mokena, IL
Motorcycle: 1992 GL1500A Aspencade

Re: Right handlebar control plug

Post by nvirgilio » Sun Mar 15, 2015 8:02 pm

Thank you very much.



Post Reply