Carb rejetting with aftermarket muffler install?


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
jimsgoldwing
Posts: 15
Joined: Fri May 03, 2013 11:07 am
Location: Oakdale, LA
Motorcycle: 1995 GL1500SE

Carb rejetting with aftermarket muffler install?

Post by jimsgoldwing » Sun Mar 22, 2015 10:12 am



I seen this ad for aftermarket mufflers. The ad says carb rejetting may be desired for best performance. Has anyone done this? Thanks in advance.

http://www.ebay.com/itm/Honda-Gold-Wing ... #vi-ilComp



User avatar
ct1500
Posts: 843
Joined: Wed Nov 10, 2010 8:09 pm
Location: Glastonbury,CT
Motorcycle: 1988 GL1500
Contact:

Re: Carb rejetting with aftermarket muffler install?

Post by ct1500 » Sun Mar 22, 2015 12:50 pm

You will be fine with no further adjustments.
This is what I do
Local and need repair help with your 1500, Valkyrie or ST please PM

User avatar
bstig60
Posts: 937
Joined: Sat Jun 29, 2013 9:14 pm
Location: Nevada City, CA. Rockledge, FL.
Motorcycle: 2003 GL 1800
1999 GL1500AC ASP for Sale
1999 Virago XV1100LC
1994 Time Out Camping Trailer
Luggage Trailer for Sale
Contact:

Re: Carb rejetting with aftermarket muffler install?

Post by bstig60 » Sun Mar 22, 2015 8:09 pm

You won't need to rejet. Take a look at your plugs after you run them a few hundred miles and note the color. If the bike is running a bit lean, adjust your pilot screws out 1/4 turn and run it awhile and check again. Unless your mufflers are bad, I would not replace them.
Bill

jimsgoldwing
Posts: 15
Joined: Fri May 03, 2013 11:07 am
Location: Oakdale, LA
Motorcycle: 1995 GL1500SE

Re: Carb rejetting with aftermarket muffler install?

Post by jimsgoldwing » Mon Mar 23, 2015 7:24 am

They are getting bad Bill. I pulled them off (doing the rear tire change) and poured a bunch of rust/pieces out of the tubes. I am in no hurry, may do it next season. :|



Post Reply



Who is online

Users browsing this forum: Erdeniz Umman and 10 guests