5 pin DIN


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
rmorris301
Posts: 7
Joined: Thu Jul 23, 2009 12:57 pm
Location: United States

5 pin DIN

Postby rmorris301 » Tue Jul 28, 2009 3:23 pm



Does anyonew have the layout foe the 5 pin din on the intercom system. I broke my headphone din and I am not about to buy another headphone if I don't have to.
Thanks



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 5 pin DIN

Postby WingAdmin » Tue Jul 28, 2009 3:42 pm

Courtesy of the goldwingfacts.com web site:


rmorris301
Posts: 7
Joined: Thu Jul 23, 2009 12:57 pm
Location: United States

Re: 5 pin DIN

Postby rmorris301 » Tue Jul 28, 2009 3:45 pm

you are the man. A life saver,
thanks

User avatar
buffdaddy55
Posts: 90
Joined: Sun Jun 12, 2011 5:43 pm
Location: Ochlocknee, Ga USA
Motorcycle: 1985 GL1200A Aspencade, 2002 GL1800-Illusion Red,1981 CB650C
Contact:

Re: 5 pin DIN

Postby buffdaddy55 » Sat Oct 01, 2011 7:53 am

Any ideas on where I can get Din5 connectors to make my own intercom cable?Need male and female. Thanks to anyone who can. :idea: :?

User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 5 pin DIN

Postby WingAdmin » Sat Oct 01, 2011 10:56 am

You can get them pretty well at any online electronics parts house:

http://www.allelectronics.com/make-a-st ... cks/1.html

I normally like using pre-molded DIN cables as they are inherently weatherproof - but the problem is that a lot of pre-molded DIN cables are meant for use as MIDI cables or computer keyboard cables, and don't necessarily have proper shielding in the cable, or in a lot of cases even have all five pins connected. So for this application, I've found that "rolling your own" with discrete plugs and jacks is the best way to go.




Return to “GL1500 Information & Questions”




Who is online

Users browsing this forum: linkdexbot [Bot] and 3 guests