5 to 4 harness

Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
User avatar
Posts: 574
Joined: Tue Sep 29, 2009 9:00 pm
Location: Calgary, Alberta
Motorcycle: 1992 GoldWing 1500SE

5 to 4 harness

Postby hap2 » Tue Aug 18, 2015 5:53 pm

About how long would it take to wiring in a 5 to 4 harness on a 1500 once the seat is removed?

Also, I was told that there's some plug under my trunk on the left hand side where this plugs into. IF that is correct, can someone send me a video or picture of where exactly it is? I can't find it on mine anywhere.

Thank you

User avatar
Posts: 3082
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500
2004 NRX1800 Rune

Re: 5 to 4 harness

Postby dingdong » Wed Aug 19, 2015 7:56 am

I would put the time at around an hour to 2 hours. Fishing and securing the wiring down through the framework to the lower hitch takes a while. The plugs are up under the lower trunk cover. Held on with 4 screws. The connectors are where the existing wiring harness plugs into the tail light fixture under the trunk. Just unplug and insert the plug and play harness between. Be careful removing and reinstalling the cover because the retaining tabs are fragile. Sorry no video.


A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

Return to “GL1500 Information & Questions”

Who is online

Users browsing this forum: No registered users and 3 guests