1996 Gl1500A aspencade When put in 1st gear, the clutch is pulled in, radio is on, When I let clutch out, the volume goes way down. can't hardly hear it. At the same time the neutral light flickers. Replaced clutch safety switch. Any idea?
But I bypassed the clutch safety switch every things works okay, but reverse does not work and the neutral lights stays on. Any idea?
stumped
-
- Sponsored Links
-
StarleneSmith
- Posts: 2
- Joined: Sat May 14, 2016 8:37 pm
- Location: Jonesville, MI
- Motorcycle: 1996 G1500A Aspencade
-
WingAdmin
- Site Admin
- Posts: 18716
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
Re: stumped
You've got a bad ground on the radio. When you pull the clutch in, the radio is trying to find ground any way it can, and the clutch switch is providing it.StarleneSmith wrote:1996 Gl1500A aspencade When put in 1st gear, the clutch is pulled in, radio is on, When I let clutch out, the volume goes way down. can't hardly hear it. At the same time the neutral light flickers. Replaced clutch safety switch. Any idea?
But I bypassed the clutch safety switch every things works okay, but reverse does not work and the neutral lights stays on. Any idea?
Take a look at the connector on the radio, and check the ground(s) - any solid green wires. Make sure they are in fact grounded. Check the grounds on the frame as well.
-
StarleneSmith
- Posts: 2
- Joined: Sat May 14, 2016 8:37 pm
- Location: Jonesville, MI
- Motorcycle: 1996 G1500A Aspencade
Re: stumped
When I get a chance this weekend I will get into it. Thank you