swingarm special tool


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
mtlmn57
Posts: 1
Joined: Wed Aug 16, 2017 3:01 pm
Location: Granville, N.Y.
Motorcycle: 1993 GL1500I Interstate

swingarm special tool

Post by mtlmn57 » Wed Aug 16, 2017 3:14 pm



Does anyone know where I can get the special tool to remove the swingarm nuts? The manual shows a specialty tool for the left side.



User avatar
Erdeniz Umman
Posts: 653
Joined: Tue Oct 27, 2015 12:33 am
Location: Ankara Turkey
Motorcycle: 2000 GL1500SE

Re: swingarm special tool

Post by Erdeniz Umman » Wed Aug 16, 2017 4:13 pm

This link may give you an idea to make it by yourself.
https://blacklabadventures.com/2012/04/ ... val-tools/

User avatar
WingAdmin
Site Admin
Posts: 19044
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: swingarm special tool

Post by WingAdmin » Wed Aug 30, 2017 8:27 pm

I'm told this tool (meant for bicycles) fits, but I haven't tried it: https://www.amazon.com/Park-Tool-Freewh ... ingdocs-20

User avatar
Jump Wings
Posts: 15
Joined: Wed Jul 30, 2014 9:58 am
Location: Fond Du Lac, Wisconsin
Motorcycle: 1988 GL1500 Goldwing

Re: swingarm special tool

Post by Jump Wings » Mon Jun 11, 2018 4:20 pm

mtlmn57 wrote:
Wed Aug 16, 2017 3:14 pm
Does anyone know where I can get the special tool to remove the swingarm nuts? The manual shows a specialty tool for the left side.
Did either of the suggestions work?
Mike

82nd Abn. Div. 67 - 69 Ft. Bragg, N.C.
173rd Abn. Brg. 69 - 70 Vietnam

User avatar
madmtnmotors
Posts: 34
Joined: Fri Jun 02, 2017 5:51 pm
Location: Saint Cloud, Florida
Motorcycle: 1984 Goldwing

Re: swingarm special tool

Post by madmtnmotors » Tue Jun 19, 2018 10:03 pm

WingAdmin wrote:
Wed Aug 30, 2017 8:27 pm
I'm told this tool (meant for bicycles) fits, but I haven't tried it: https://www.amazon.com/Park-Tool-Freewh ... ingdocs-20
That is the tool I used for my 84' GL1200 swingarm. 8-)


Wilbur


Sent from my Tandy TRS-80! :ugeek:

Post Reply