vacuum hoses

Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Posts: 1
Joined: Tue Feb 15, 2011 11:42 am
Location: Cedar Blluff Alabama
Motorcycle: 1988 Goldwing

vacuum hoses

Postby jbeer » Tue Feb 15, 2011 12:11 pm

I have a 1988 Goldwing 1500, I am going to do a tune up and carb sync but and have found a vacuum hose that comes up from under the filter box, the lose end is laying next to the filter box but I don't see anyplace for it. It is marked with the number two. Would love to know where this hose goes.

User avatar
Posts: 1038
Joined: Mon Jul 19, 2010 7:46 pm
Location: Lexington, North Carolina
Motorcycle: 1989 Honda GL1500 Aspencade

Re: vacuum hoses

Postby robb » Sun Feb 20, 2011 12:12 am

Discharge tube from evap canister.

User avatar
Posts: 1188
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2003 - GL1800A

Re: vacuum hoses

Postby MikeB » Sun Feb 20, 2011 7:36 pm

If you have a service manual, look on pages 4-7 and 4-8 for the vacuum hose routing.
See below.
Tacoma, WA, USA

Posts: 3
Joined: Mon Jan 27, 2014 4:29 pm
Location: Duncan
Motorcycle: 1987 Honda Goldwing 1200a aspencade

Re: vacuum hoses

Postby Rev2 » Fri Feb 14, 2014 7:53 pm

I have a 1987 Honda Goldwing Aspencade 1200A setup for California emission
the vaccum hose or numbered I have one that does not seem to go anywhere. The #7 Vacuum is hock to a valve along with the #6 and number 4 hose. what does the # 7 go to. Help. When I start the engine Gas comes out of the #7 hose. Help

Return to “GL1500 Information & Questions”

Who is online

Users browsing this forum: Bluewaterhooker0 and 2 guests