Here is the modification for the spotlight harness in order for the spot lights to work on brights also, Only extra items required will be a 30 Amp relay and 4 crimping spades. You can use your old harness simply by removing the wires in around the old relay and fitting it to the new one as per diagram.
The old harness can be found under the left pocket which can be removed by taking of the trim and removing the studs in the pocket by pressing the pins in. Be carefull as these pin have a mind of its own to shoot in the air when taking the pocket holder off. The harness is located bottom right somewhere.
Information and questions on GL1800 Goldwings (2001-Present)
- Sponsored Links
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests