Help needed with JM cb mic install on 07 1800

Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Post Reply
Posts: 1
Joined: Sat Nov 12, 2011 8:36 pm
Location: East Prospect, Pa
Motorcycle: 2007 GL 1800 Goldwing

Help needed with JM cb mic install on 07 1800

Post by fkiehner » Sun May 18, 2014 4:42 am

Just received my JM CB microphone and the instructions say to locate the 2 wire PTT cable under the seat in the area of the relay box. Only thing I can locate is the 3 wire power line for the CB.
Traced harnesses coming from unit in trunk and one goes to the power and the other goes front to handle bar switch assy. I am not able to locate a separate PTT cable on my bike.
Had the CB installed when I purchased the wing in 07.
Any assistance would be appreciated.
Thanks in advance.
Frank K
East Prospect, Pa

User avatar
Site Admin
Posts: 17875
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Help needed with JM cb mic install on 07 1800

Post by WingAdmin » Tue May 20, 2014 8:51 am

It is buried a little bit. It's shown in the picture below as C30. You will find it inside a black rubber boot, along with another connector. The rubber boot is often pushed down behind the relays - follow the passenger intercom wire and you should find it.
Intercom connectors
Intercom connectors

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 4 guests