Directions to replace the toe shifter assembly on 04


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
jamesbennett
Posts: 2
Joined: Wed May 26, 2010 4:38 pm
Location: Blackshear, GA
Motorcycle: 2004 GL1800

Directions to replace the toe shifter assembly on 04

Postby jamesbennett » Thu May 27, 2010 4:29 pm



I broke the toe shifter on my 04 and need directions to replace with the new one. Thanks!!



gareva1
Posts: 318
Joined: Mon Oct 26, 2009 4:51 pm
Location: Baton Rouge, LA
Motorcycle: 2008 GL1800 Prem Audio

Re: Directions to replace the toe shifter assembly on 04

Postby gareva1 » Fri May 28, 2010 3:35 pm

How did you break the shifter? I'm assuming it was because of a drop---do you only have half of the shifer arm? To get to the shift arm, you'll need to remove the lower front cowling (the plastic part where the foglights would go if you have them), and then the header cover for the left side (it's the painted metal part that the shifter arm seems to disappear into). From there you should be able to see how the shifter arm linkage attaches.

The fiche for that part of the bike is here:

http://www.hdlparts.com/fiche_section_d ... &fveh=3500

the honda part number for the shift lever itself is 24705-MCA-000 and it's right around $90

jamesbennett
Posts: 2
Joined: Wed May 26, 2010 4:38 pm
Location: Blackshear, GA
Motorcycle: 2004 GL1800

Re: Directions to replace the toe shifter assembly on 04

Postby jamesbennett » Sat May 29, 2010 7:51 am

Thanks for the info/directions.
Yes I actually dropped the bike while loading it on a trailer that I was building. My foot missed the ramp. The ramp is now 12" wider.

Thanks again!!


Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: No registered users and 6 guests