using the cb mic. switch


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Derek K
Posts: 1
Joined: Sat Aug 15, 2015 9:10 pm
Location: morro bay. ca.
Motorcycle: Not yet but very soon

using the cb mic. switch

Postby Derek K » Sat Oct 10, 2015 2:24 pm



I would like to use the cb talk switch for another project, I have a 2008 gw and I was wondering if anyone knows where the plug is that goes to that switch?



User avatar
themainviking
Posts: 2579
Joined: Wed Sep 29, 2010 6:59 pm
Location: North Bay, Ontario, Canada
Motorcycle: 2009 GL1800 AD

Re: using the cb mic. switch

Postby themainviking » Sun Oct 11, 2015 7:12 am

That would be on the right side as you sit on the bike, under the shelter, inside a rubber boot. You can access it without removing the shelter, but it is tight, and you will need to loosen the shelter by unscrewing the fasteners that are under the trim strip. Be careful with the trim strip as the little claws break fairly easily. Google the install instructions for the CB and you will find a detailed sketch of the location. In the mean time, I will go through my instruction sheets and see if I can find that one. If I find it, I will post back.

Okay, here is a link to an installation booklet. It shows where the main connector is for the control wiring. It does not show it to be in a boot, but my memory says it was. I, however have an airbag model wing so that may be the difference.

http://www.justwings.com/uploads/CB_RADIO_KIT.pdf
It ain't about the destination - it's all about the journey

ImageImage


Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: Bing [Bot], kit980 and 1 guest