Right hand cluster/throttle tube removal


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Wistrick
Posts: 2
Joined: Sat Aug 01, 2015 4:38 pm
Location: Pendleton Or
Motorcycle: 2004 GL1800

Right hand cluster/throttle tube removal

Postby Wistrick » Tue Jan 05, 2016 7:18 pm



On my 2004 GL1800 the Throttle is slow to return.....It will close on it own but not snap back...(takes about 2 seconds) I open Up the cluster and the inside is pretty gummed up from something being sprayed inside it...(I am guessing lube) I am trying to the cables off the throttle tube but the pull cable seem to screw in the top of the cluster and I can't figure out to get the cluster off....I would like to lube the cables and clean up the throttle sleeve....What am I missing.....

thanks

Dan



Wistrick
Posts: 2
Joined: Sat Aug 01, 2015 4:38 pm
Location: Pendleton Or
Motorcycle: 2004 GL1800

Re: Right hand cluster/throttle tube removal

Postby Wistrick » Tue Jan 05, 2016 7:46 pm

seem some also has greased between the bar and the tube and a bunch of gunk is in there to...How do you get the cables off the throttle tube to remove it....No matter what I try can't get enough slack....

Dan


Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests