CB will not change channels


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Post Reply
markfeather
Posts: 7
Joined: Sat Feb 11, 2012 11:15 pm
Location: Sterling
Motorcycle: 1997 Wing

CB will not change channels

Post by markfeather » Thu May 26, 2016 4:51 pm



I have a 2007 Wing and bought a factory CB and then had it installed and after about 2 days it will not change channels. It is Stuck on Channel 0. I checked the unit and the wires look good and connections are OK.

Any ideas>

Thanks

Mark



User avatar
MikeB
Posts: 1704
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2003 - GL1800A

Re: CB will not change channels

Post by MikeB » Fri May 27, 2016 1:53 am

I would take it back to the person that installed it for you and have them check it out.
MikeB
Tacoma, WA, USA

User avatar
themainviking
Posts: 2784
Joined: Wed Sep 29, 2010 6:59 pm
Location: North Bay, Ontario, Canada
Motorcycle: 2009 GL1800 AD

Re: CB will not change channels

Post by themainviking » Fri May 27, 2016 7:38 am

But first, remove the negative battery terminal, wait a couple minutes = maybe five. Reattach negative battery terminal and see what you got. If it is still the same, then you may have a faulty CB unit.
It ain't about the destination - it's all about the journey

ImageImage

harvey01
Posts: 790
Joined: Thu May 31, 2012 7:14 pm
Location: Henrico, Virginia
Motorcycle: 2004 GL1800

Re: CB will not change channels

Post by harvey01 » Fri May 27, 2016 8:23 am

If Mainviking's suggestion does not work and the installer cannot get if going. you might want to contact Larry at wingconnect.com and see if he can fix or suggest repair.


harvey
Ride Safe and Ride Often

Post Reply



Who is online

Users browsing this forum: Google Adsense [Bot], rfkurtz, rjnson@comcast.net and 6 guests