2012 Headlights Quit (2 questions)


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Post Reply
AlBeas1958
Posts: 2
Joined: Sat Mar 26, 2016 7:34 pm
Location: Macon, GA
Motorcycle: 1983 GL1100 Interstate; 2012 GL1800

2012 Headlights Quit (2 questions)

Post by AlBeas1958 » Wed Oct 04, 2017 4:50 pm



1. 2012 Goldwing headlights wouldn't work this morning, went through this site today and tried putting the reverse on still nothing, then pulled out on the starter switch and they all came on. Do I need to replace the starter switch?

2. Previous owner installed bright blue lights love their brightness, but will that eventually burn something out, they must be pulling more power? Trouble down the road?

Thanks,
AlB



User avatar
Steve F
Posts: 447
Joined: Thu Apr 07, 2011 8:25 pm
Location: suburban Chicago
Motorcycle: 1976 Honda CB750F Cafe' (sold :>( )
'03 GL1800
DARKSIDE RIDER

Re: 2012 Headlights Quit (2 questions)

Post by Steve F » Wed Oct 04, 2017 7:11 pm

2012??? Probably needs a good application of quality contact cleaner.
"To ride is the reason, the destination the excuse."

User avatar
MikeB
Posts: 1876
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade.
2003 - GL1800A

Re: 2012 Headlights Quit (2 questions)

Post by MikeB » Wed Oct 04, 2017 7:47 pm

Contact cleaner with lubricant.
MikeB
Tacoma, WA, USA

User avatar
WingAdmin
Site Admin
Posts: 18215
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 2012 Headlights Quit (2 questions)

Post by WingAdmin » Thu Oct 05, 2017 8:39 am

As for the "blue lights" - do you know what type they are?

IF they are HID or LED, they will be pulling much LESS power than the standard incandescent bulbs, and will definitely not burn anything out.

AlBeas1958
Posts: 2
Joined: Sat Mar 26, 2016 7:34 pm
Location: Macon, GA
Motorcycle: 1983 GL1100 Interstate; 2012 GL1800

Re: 2012 Headlights Quit (2 questions)

Post by AlBeas1958 » Sat Oct 07, 2017 1:25 pm

Not sure what type of Bulb they are. long slender bulbs on the high beams that i can see. Thanks for the info all>

peppilepew
Posts: 399
Joined: Wed Jun 08, 2011 4:35 pm
Location: Plaistow, New Hampshire
Motorcycle: 2000 Gl1500 Se
2012 GL1800 Level 3

Re: 2012 Headlights Quit (2 questions)

Post by peppilepew » Sun Oct 08, 2017 7:39 am

You may want to contact the previous owner. He may have installed a lock out for the HID's using the oil pressure switch. Your lows are fed from two different locations. RS from starter switch, LS direct from relay.

User avatar
AZgl1800
Posts: 175
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800 still young at 111,980 miles

Re: 2012 Headlights Quit (2 questions)

Post by AZgl1800 » Sun Oct 08, 2017 3:16 pm

yes, be sure to check that the HIDs are controlled by an Oil Pressure switch, mine are... keeps the ballast from cycling unnecessarily when starting the engine.
John
'02 Gl1800 Hot Rod Yellow,
daughter named her Big Bird :lol:
http://www.goldwingfacts.com

User avatar
PastoT
Posts: 371
Joined: Sun Jul 01, 2012 9:20 pm
Location: Mt Home, Idaho
Motorcycle: 2002 GL1800 (107k)

Re: 2012 Headlights Quit (2 questions)

Post by PastoT » Mon Oct 16, 2017 11:52 pm

Definitely get some CRC and flush out the start button. The word is not to use WD-40 or wet spray lubricants as they collect the grime that can jam the switch up; but I've used it very sparingly before. Living in a dust bowl here my switches probably stick more than many other riders and I carry CRC in my toolkit. Do be careful to ensure the starter doesn't get stuck running, it can and does happen. My Starter relay B had a melt down after a 20 mile jaunt with the starter humming away. I couldn't hear it until I pulled over to refill a coffee mug and couldn't shut off until pulling the switch out. Starter was fine but one starter relay (solenoid) over heated, then it cooled down and the plunger got stuck and failed (no start). One can separate the right switch pod and clean the switch more completely but its not for the faint of heart and parts have been known to get lost!


Tom, in Mountain Home, Idaho
2002 GL1800 (Illusion Red) Non-ABS, 108k miles
Retired Air Force

"Audentes Fortuna Juvat"
Image

Post Reply