Pre-Loader assembly fillup


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
Gary O
Posts: 4
Joined: Sun Nov 21, 2010 3:10 pm
Location: Sarnia,On
Motorcycle: 2003 GL1800 ABS

Pre-Loader assembly fillup

Postby Gary O » Wed Feb 02, 2011 8:15 am



Good morning. I've had to remove my shock assembly from my trike to find that the bearings were worn out. When removing the hydraulic hose from the shock to the assembly unit. Some had dripped out, but not to the point that would be to alarmimg. So, I decided to remove the assembly and filled it up. Has anyone had to fill there's up and was there any issues afterwards.

thanks in advance
Gary



User avatar
FlyBoy2121
Posts: 301
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: Pre-Loader assembly fillup

Postby FlyBoy2121 » Wed Feb 02, 2011 10:28 am

I Gary O :D

Go to see this adress, this address going to help you for the rear shock.

http://www.pbase.com/fredharmon/rearshock

FlyBoy2121 :)

Gary O
Posts: 4
Joined: Sun Nov 21, 2010 3:10 pm
Location: Sarnia,On
Motorcycle: 2003 GL1800 ABS

Re: Pre-Loader assembly fillup

Postby Gary O » Wed Feb 02, 2011 11:45 am

Thanks again. Checking out as i write.

Gary

User avatar
FlyBoy2121
Posts: 301
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: Pre-Loader assembly fillup

Postby FlyBoy2121 » Wed Feb 02, 2011 2:00 pm

I Gary O :D

Tank you !!

At the same address, if you click at the top of the page on (allgaleries) you'll find many things on the 1800cc.


FlyBoy2121 :)




Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: Google Adsense [Bot] and 3 guests