Information and questions on GL1800 Goldwings (2001-Present)
- Sponsored Links
3 posts • Page 1 of 1
- Posts: 1
- Joined: Sat Mar 19, 2011 11:47 am
- Location: W. Melbourne
- Motorcycle: 2008 GL1800
I have lost the repair manual CD and need to change my clutch fluid. Now can't find the clutch slave cylinder bleed valve on my '08 GL1800. Obviously, I'm just missing something. Where is it?
- Posts: 38
- Joined: Tue Mar 09, 2010 6:33 am
- Location: Orlando, Florida
- Motorcycle: 2004 GL1800
Hi Red!Red429 wrote:Remove frt lower cowl. Remove/drop down evap canister. Now you can see the bleed valve on the frt of the engine.
I personally managed to do this without removing the cowl, saved a lot of jiggery pokery (a scientific term) trying to put it all back together again. The following is a short writeup I have based on the service manual when I did this as part of my 24K service:
http://bohica.homeip.net:591/~mark/GL18 ... RemoveEVAP
Two bolts undone sideways with a wrench through the slots in the cowl drops the canister and gives you the clearance underneath to attack the bleed nipple.
Canister bolts as viewed through slots in cowl:
Bleed nipple as viewed underneath once the canister is clear, note bolts for canister at bottom (front most part of bike) part of picture:
Who is online
Users browsing this forum: Steve F and 2 guests