2008 gl1800 torque values for brake caliper


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
rcp303
Posts: 2
Joined: Sun Jun 05, 2011 1:21 pm
Location: Lubbock, Texas
Motorcycle: 2008 gl1800 goldwing

2008 gl1800 torque values for brake caliper

Postby rcp303 » Sun Jun 05, 2011 5:53 pm



I replaced the rear tire on my Goldwing and decided to go ahead and replace the brake pads. Everything has gone well so far except I do not have the torque values for the caliper mounting bolts, the pin, and the bolts that hold the caliper back to the caliper front section. Can anyone let me know what these values are, so I can finish up tonight??
Randy



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 2008 gl1800 torque values for brake caliper

Postby WingAdmin » Mon Jun 06, 2011 2:35 pm

Here you go - everything brake you ever wanted to know. :)

Brake caliper bleed valve 5.4 N-m (0.55 kgf-m, 4.0 ft-lb)
Front fork anti-dive plunger bleed valve 5.4 N-m (0.55 kgf-m, 4.0 ft-lb)
Front master cylinder reservoir cap screw 1.5 N-m (0.15 kgf-m, 1.1 ft-lb)
Brake pad pin 17 N-m (1.7 kgf-m, 13 ft-lb)
Brake hose oil bolt 34 N-m (3.5 kgf-m, 25 ft-lb)
Brake lever pivot bolt 1 N-m (0.1 kgf-m, 0.7 ft-lb)
Brake lever pivot nut 5.9 N-m (0.60 kgf-m, 4.4 ft-lb)
Front brake light/cruise cancel switch screw 1.2 N-m (0.12 kgf-m, 0.9 ft-lb)
Front master cylinder holder bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Rear master cylinder reservoir mounting bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Rear master cylinder switch plate lock nut 17 N-m (1.7 kgf-m, 13 ft-lb)
Rear master cylinder joint nut 17 N-m (1.7 kgf-m, 13 ft-lb)
Rear master cylinder mounting bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Brake pedal pinch bolt 27 N-m (2.8 kgf-m, 20 ft-lb)
Rider footpeg mounting bolt 27 N-m (2.8 kgf-m, 20 ft-lb)
Rear brake light/cruise cancel switch holder screw 1.5 N-m (0.15 kgf-m, 1.1 ft-lb) Apply locking agent to the threads.
Secondary master cylinder mounting bolt 30 N-m (3.1 kgf-m, 22 ft-lb) ALOC bolt: replace with a new one.
Front brake caliper bracket pin 12 N-m (1.2 kgf-m, 9 ft-lb) Apply locking agent to the threads.
Front brake caliper pin 22 N-m (2.2 kgf-m, 16 ft-lb)
Front brake caliper assembly bolt 32 N-m (3.3 kgf-m, 24 ft-lb) ALOC bolt: replace with a new one.
Left front brake caliper lower mounting bolt 31 N-m (3.2 kgf-m, 23 ft-lb) ALOC bolt: replace with a new one.
Left front brake caliper-to-secondary master cylinder joint bolt 26 N-m (2.7 kgf-m, 19 ft-lb) ALOC bolt: replace with a new one.
Right front brake caliper mounting bolt 31 N-m (3.2 kgf-m, 23 ft-lb) ALOC bolt: replace with a new one.
Wheel speed sensor bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Rear brake caliper bracket pin 22 N-m (2.2 kgf-m, 16 ft-lb) Apply locking agent to the threads.
Rear brake caliper pin bolt 27 N-m (2.8 kgf-m, 20 ft-lb)
Rear brake caliper assembly bolt 32 N-m (3.3 kgf-m, 24 ft-lb) ALOC bolt: replace with a new one.
Rear brake caliper mounting bolt 45 N-m (4.6 kgf-m, 33 ft-lb) ALOC bolt: replace with a new one.
Proportional control valve mounting bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Delay valve mounting bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Brake pipe joint nut 14 N-m (1.4 kgf-m, 10 ft-lb)
Brake hose clamp bolt 12 N-m (1.2 kgf-m, 9 ft-lb)
Brake hose joint attaching bolt 12 N-m (1.2 kgf-m, 9 ft-lb)

rcp303
Posts: 2
Joined: Sun Jun 05, 2011 1:21 pm
Location: Lubbock, Texas
Motorcycle: 2008 gl1800 goldwing

Re: 2008 gl1800 torque values for brake caliper

Postby rcp303 » Mon Jun 06, 2011 4:38 pm

Thank you for the information. I will get things torqued to specs.
Appreciate the help, will get me a service manual soon.
Thanks again! :)


Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: Yahoo Slurp [Bot] and 1 guest