susp display error

Information and questions on GL1800 Goldwings (2001-2017)
  • Sponsored Links
Post Reply
Posts: 5
Joined: Fri Jun 17, 2011 12:29 pm
Location: Clinton, ar
Motorcycle: honda 2003 goldwing gl1800

susp display error

Post by dabalso » Wed Jul 13, 2011 3:38 pm

I have a 2003 gl1800 that has been triked. When I push the disp button twice, I get an error -

I think that, if I still had a bike, I would get the pressure reading in the suspension system.
I think that the sensor was removed when the bike was triked. I am trying to confirm
what should be displayed. If it is a pressure reading, I want to try to install a sensor for
the trike suspension.
Any help appreciated.

User avatar
Steve F
Posts: 474
Joined: Thu Apr 07, 2011 8:25 pm
Location: suburban Chicago
Motorcycle: 1976 Honda CB750F Cafe' (sold :>( )
'03 GL1800

Re: susp display error

Post by Steve F » Wed Jul 13, 2011 9:54 pm

Two presses of the button should get you the rear suspension pressure level, the first press is the ambient temperature.
"To ride is the reason, the destination the excuse."

k david
Posts: 2
Joined: Tue Sep 14, 2010 7:13 pm
Location: Gardiner, Maine
Motorcycle: 2005 GL1800 Trike
Motor Trike conversion

Re: susp display error

Post by k david » Thu Jul 14, 2011 7:46 pm

I have a 2005 GW with a Motortrike conversion and I have the same message.I am told that when they remove the GW rear the system is disconnected as there is no longer any air to the front. Not sure, but what I have been told....

Post Reply