Fog Light install problem


Information and questions on GL1800 Goldwings (2001-Present)
  • Sponsored Links
foti
Posts: 3
Joined: Fri Dec 25, 2009 8:35 pm
Location: jax, fl
Motorcycle: 2009 gl1800

Fog Light install problem

Postby foti » Sat Dec 26, 2009 10:01 am



I'm trying to install Big Bike Parts "Lower Fog Light Kit" on 2009 gl1800 (w/o air bag). I've already installed and connected the lights into the existing wiring harness. But I cannot find the connection for the switch. According to the instructions I should find the "accessory black 4 pin connector" under the left control panel (the one with the headlight beam and preload adjustments). I've looked (i think thoroughly) and see no vacant, unused connectors. Anybody got any advice of how/where to find it?



User avatar
FlyBoy2121
Posts: 301
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: Fog Light install problem

Postby FlyBoy2121 » Tue Dec 29, 2009 1:12 pm

I Foti !

The switch is located on the left below the empty pocket in the switches to adjust the suspention,

If you do not look towards even lower, almost or is the mouth of heating is very low.

If you do not see, you must remove the top Shelda to find it.

Happy New Year 2010

I can not put a picture to help you better.

FlyBoy2121 :D

foti
Posts: 3
Joined: Fri Dec 25, 2009 8:35 pm
Location: jax, fl
Motorcycle: 2009 gl1800

Re: Fog Light install problem

Postby foti » Tue Dec 29, 2009 1:29 pm

FlyBoy... I just need to be sure I understand you correctly... you're saying the switch itself is part of the bike and laying in the general area you described?
I assummed it was provided with the fog light kit I bought... but missing.

foti
Posts: 3
Joined: Fri Dec 25, 2009 8:35 pm
Location: jax, fl
Motorcycle: 2009 gl1800

Re: Fog Light install problem

Postby foti » Tue Dec 29, 2009 1:53 pm

Please disregard my last post....

I forgot that I had already solved the problem in the original post... and assumed the post you had answered was my new problem... which is "Now that I have the lights and relay harness connected, it appears as though my kit is missing the actual fog light switch itself".

Once my local bike shop opens up again (apparently they're all gone for the holidays) I'll ask them to cough one up.

User avatar
FlyBoy2121
Posts: 301
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: Fog Light install problem

Postby FlyBoy2121 » Thu Dec 31, 2009 9:30 am

I Foti

I made a translation with software, sometimes I am a long answer.

To all a happy new year 2010

FlyBoy2121 Québec Canada




Return to “GL1800 Information & Questions”




Who is online

Users browsing this forum: No registered users and 4 guests