1984 GL1200A Aspencade


Motorcycle related items for sale or wanted
  • Sponsored Links
Post Reply
gooberwiper
Posts: 4
Joined: Sat Apr 09, 2016 8:58 am
Location: Beavercreek, OH
Motorcycle: 1984 GL1200A Aspencade

1984 GL1200A Aspencade

Post by gooberwiper » Sun Jun 03, 2018 7:08 am



Greetings all. The time has come to part with my '84 Aspencade, I've purchased a new bike. I've rebuilt or replaced nearly everything rubber, and put several thousand miles on her. The frame is solid, she's very good cosmetically (seat is perfect). Engine runs well, she doesn't use oil. The following have been replaced or rebuilt: tires, timing belts, radiator hoses, thermostat, compressor dessicant, forks, brakes, clutch and brake m/c, carbs, air filter, fuel filter, fuel lines. Everything works as it should, although one segment on the clock is intermittent (haven't taken a look at fixing what I presume is a cold solder joint), and I cannot verify the CB. Some of the ABS is beginning to crack, I have a sheet of material that I was planning to use to begin those repairs. Toolkit and compressor hose are in the saddlebag. I'm asking $3,499, it has about 48k on the odometer, bike is located in Dayton, OH.
Attachments















Post Reply