what do you use to lift your trike for service and inspection


Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Post Reply
chads920
Posts: 94
Joined: Mon Sep 28, 2015 10:14 am
Location: Keremeos BC Canada, Arizona City AZ (winter)
Motorcycle: 93 1500A Gold Wing - Champion Trike
03 Yamaha RSV (sold)
89 Yamaha VR (sold)
90 Bunkhouse tent trailer (sold)
2016 Bunkhouse tent trailer

what do you use to lift your trike for service and inspection

Post by chads920 » Sun Jun 03, 2018 8:47 pm



there are not many shops that have a means to lift a trike for general service and maintenance. I have been considering digging a service pit of a size that matches my trike wheel base but ... is there a simple way (not that i'm allergic to shovels but)


Sometimes your find yourself on a lonely open road, sometimes on a open road you find yourself.
BBM - PIN 24DF1560
Member of the Royal Canadian Legion Br. 227, Legion Rider Unit member

User avatar
Kurt J
Posts: 16
Joined: Sat Oct 28, 2017 7:47 pm
Location: Scarmento californa
Motorcycle: 2001 gl1800a

Re: what do you use to lift your trike for service and inspection

Post by Kurt J » Sun Jun 03, 2018 10:43 pm

I would think a set of car drive up stands would work better.....;)
Mind over Matter:
You don't mind , it don't matter..... :D

User avatar
terryt
Posts: 184
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike

Re: what do you use to lift your trike for service and inspection

Post by terryt » Mon Jun 04, 2018 1:43 am

For my Trike I built a hydraulic lift. it lifts the trike up 23" from the ground rear wheels are free moving so can check front can be jacked up to checked steering.
basically you can do a full service with out laying on the floor.

when its not in use the trike parks over it so not taking up any more floor space.
Its the best thing I built apart from my trike
Attachments







chads920
Posts: 94
Joined: Mon Sep 28, 2015 10:14 am
Location: Keremeos BC Canada, Arizona City AZ (winter)
Motorcycle: 93 1500A Gold Wing - Champion Trike
03 Yamaha RSV (sold)
89 Yamaha VR (sold)
90 Bunkhouse tent trailer (sold)
2016 Bunkhouse tent trailer

Re: what do you use to lift your trike for service and inspection

Post by chads920 » Mon Jun 04, 2018 7:29 am

now that is perfect! I am now suffering from garage/hoist envy. Living in a Park model (RV) trailer (50 sq Meters) I don't have a covered area in which I could locate this jacking sys but....
Thank you for the idea and pics, your device certainly provides access to some of the currently inaccessible parts.
Sometimes your find yourself on a lonely open road, sometimes on a open road you find yourself.
BBM - PIN 24DF1560
Member of the Royal Canadian Legion Br. 227, Legion Rider Unit member

User avatar
WingAdmin
Site Admin
Posts: 19059
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: what do you use to lift your trike for service and inspection

Post by WingAdmin » Mon Jun 04, 2018 1:40 pm

terryt wrote:
Mon Jun 04, 2018 1:43 am
For my Trike I built a hydraulic lift. it lifts the trike up 23" from the ground rear wheels are free moving so can check front can be jacked up to checked steering.
basically you can do a full service with out laying on the floor.

when its not in use the trike parks over it so not taking up any more floor space.
Its the best thing I built apart from my trike
That's a fantastic lift!

I am always complaining about my 2 1/2 car garage, and a lack of space for things. I looked at your pictures and instantly said, "I bet he's in the UK." I checked...and yup. You guys over there do amazing things with tiny little garages (compared to what we have over here).

I know someone over there who did dig a pit in his garage, then shored it up and poured concrete, so he has a concrete-walled and floored pit in which to do work on his TVR.

User avatar
terryt
Posts: 184
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike

Re: what do you use to lift your trike for service and inspection

Post by terryt » Mon Jun 04, 2018 1:50 pm

Thanks WingAdmin. It make life a lot easer with this lift. I got a bike lift bench but it was a pain moving it getting the bike of and the trike on and off. now the bike can stay on the work bench. and this live under the trike taking up no extra space. when I need it pull the arms out. pump it up. Now I can do a full service check all brakes and bearing fluids all at a comfortable working height

chads920
Posts: 94
Joined: Mon Sep 28, 2015 10:14 am
Location: Keremeos BC Canada, Arizona City AZ (winter)
Motorcycle: 93 1500A Gold Wing - Champion Trike
03 Yamaha RSV (sold)
89 Yamaha VR (sold)
90 Bunkhouse tent trailer (sold)
2016 Bunkhouse tent trailer

Re: what do you use to lift your trike for service and inspection

Post by chads920 » Mon Jun 04, 2018 5:09 pm

its an air cylinder that you use .. correct? Do you have a "safety" loc out in case of air pressure loss? I'm looking at your photos to try and figure material type and size etc. as I think that I could replicate your hoist.. if thats ok.
You have a background in metal and mechanics I'm guessing.
Great job by the way! :)
Sometimes your find yourself on a lonely open road, sometimes on a open road you find yourself.
BBM - PIN 24DF1560
Member of the Royal Canadian Legion Br. 227, Legion Rider Unit member

dadztoy
Posts: 39
Joined: Mon Aug 29, 2011 6:55 pm
Location: eastern Tennessee
Motorcycle: 2009 GL1800 HPNAM9

Re: what do you use to lift your trike for service and inspection

Post by dadztoy » Mon Jun 04, 2018 7:56 pm

I have my HandyLift recessed into the floor and added to 1/4" steel Diamind plates to supprot the Tow Pac trike wheels... Lifts with no problems...



User avatar
CrystalPistol
Posts: 430
Joined: Wed Mar 10, 2010 9:07 pm
Location: Shenandoah Valley of Virginia
Motorcycle: 1985 GL1200A
1997 GL1500SE Lehman Trike

Re: what do you use to lift your trike for service and inspection

Post by CrystalPistol » Mon Jun 04, 2018 10:59 pm

I use either jacks & stands or / and ramps.
Image

User avatar
terryt
Posts: 184
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike

Re: what do you use to lift your trike for service and inspection

Post by terryt » Tue Jun 05, 2018 2:35 am

chads920 wrote:
Mon Jun 04, 2018 5:09 pm
its an air cylinder that you use .. correct? Do you have a "safety" loc out in case of air pressure loss? I'm looking at your photos to try and figure material type and size etc. as I think that I could replicate your hoist.. if thats ok.
You have a background in metal and mechanics I'm guessing.
Great job by the way! :)
Hi Thanks for you comments.
I have used 60mm x 40mm x 5mm rectangular box for the main lift and 60mm x 10mm for the lifting arms. A 2.5 ton hydraulic ram and hand pump. Yes there are two safety locking bars. No back ground in metal or mechanics. The trike weights about 550kg.

chads920
Posts: 94
Joined: Mon Sep 28, 2015 10:14 am
Location: Keremeos BC Canada, Arizona City AZ (winter)
Motorcycle: 93 1500A Gold Wing - Champion Trike
03 Yamaha RSV (sold)
89 Yamaha VR (sold)
90 Bunkhouse tent trailer (sold)
2016 Bunkhouse tent trailer

Re: what do you use to lift your trike for service and inspection

Post by chads920 » Wed Jun 06, 2018 10:59 pm

cost of steel is somewhat expensive these days but I think I will do a drawing and mat list for costing.
This may be a good project for this winter when I'm in Arizona as I have a garage there and a friend that can assist with the fabricating. I'll keep an eye out for recycling opportunities to cut the cost. Your 'low profile' design is perfect for the space available. What did you decide on for the 'lock out' ... a brace, arm and pin. ?
Sometimes your find yourself on a lonely open road, sometimes on a open road you find yourself.
BBM - PIN 24DF1560
Member of the Royal Canadian Legion Br. 227, Legion Rider Unit member

User avatar
terryt
Posts: 184
Joined: Mon Jul 23, 2012 4:52 pm
Location: United Kingdom
Motorcycle: 1979 gl1000 trike
1989 gl1500 trike

Re: what do you use to lift your trike for service and inspection

Post by terryt » Thu Jun 07, 2018 1:31 am

chads920 wrote:
Wed Jun 06, 2018 10:59 pm
cost of steel is somewhat expensive these days but I think I will do a drawing and mat list for costing.
This may be a good project for this winter when I'm in Arizona as I have a garage there and a friend that can assist with the fabricating. I'll keep an eye out for recycling opportunities to cut the cost. Your 'low profile' design is perfect for the space available. What did you decide on for the 'lock out' ... a brace, arm and pin. ?
Hi Thats why i designed this one. it don't take up any more floor space it is only 4" high when closed. I have fitted lock out braces on each side held in place by wing nuts.

i will post some photo



Post Reply